|   print

Inzetbaarheid van RF en ICP-MS voor de vaststelling van metaalgehalten in verpakkingsmateriaal : Regeling Verpakking en Verpakkingsafval
[  ]
 
van Dijk J, van de Beek A, Ritsema R

51 p in Dutch   2002

RIVM rapport 518001014
download pdf (378Kb)  

Toon Nederlands

English Abstract
Within the framework of the "Regulation of Packaging and Packaging Waste" are requirements for the amounts of cadmium, lead, mercury and chromium (CrVI). The sum of the amounts may not exceed the concentration of 100 ug/g. Because of analytical limitations chromium is determined as total chromium (Cr) instead of CrVI.The applicability of three different apparatus is investigated within the framework of maintenance in an exploratory research:ICP-MS (Inductively Coupled Plasma Mass Spectrometry), XRF-XEPOS (XRF: X-Ray Fluorescence Spectrometry), XRF-NITON. Criteria of judgement are: Accuracy, Speed/ efficiency, Location restriction.The pre-selection of 115 plastic packaging samples is executed with the XRF-NITON. A limited number of samples was analysed with INAA (Instrumental Neutron Activation Analysis) as a reference method. The ICP-MS results were compared with INAA and the results of XRF-XEPOS with those of INAA and/or ICP-MS. After comparing the results it seems that the ICP-MS is most accurate with exception of the element chromium. Chromium in casings does not or not completely dissolve during digestion. ICP-MS is a time-consuming technique and the analysis is tied to the laboratory. The results of XRF-XEPOS are in good agreement with the INAA and/or ICP-MS results. The XRF-XEPOS results for Cr measured with the semi quantitative program are a factor 2 till 4 higher than the INAA and/or ICP-MS results. Adding comparable calibration samples to the measuring-program can realise a shift from a semi quantitative to a quantitative analysis. The XRF-XEPOS is a fast, efficient and on location available technique. The XRF-NITON is only useable for indicating samples with a very high exceeding of the norm. However false positive samples will also be measured.

 

RIVM - Bilthoven - the Netherlands - www.rivm.nl

Display English

Rapport in het kort
In het kader van de "Regeling Verpakking en Verpakkingsafval" worden eisen gesteld aan de gehalten van cadmium, lood, kwik en zeswaardige chroom. De som van de gehalten mag de grens van 100 ug/g niet overschrijden. Wegens analytische beperkingen wordt chroom als totaal chroom (Cr) bepaald i.p.v. zeswaardig chroom (CrVI). Een verkennend onderzoek is ingesteld naar toepassingsmogelijkheden van drie apparaten in het kader van handhaving: ICP-MS (Inductively Coupled Plasma Mass Spectrometry), XRF-XEPOS (XRF: X-Ray Fluorescence Spectrometry), XRF-NITON. Criteria van beoordeling zijn: Nauwkeurigheid, Snelheid/ efficiency, locatiegebondenheid met de XRF-NITON. Een beperkt aantal monsters is geanalyseerd met INAA (Instrumental Neutron Activation Analysis) als referentiemethode. De ICP-MS resultaten worden vergeleken met INAA en de resultaten van de XRF-XEPOS met die van INAA en/of ICP-MS. Uit de vergelijking van de resultaten blijkt ICP-MS het meest nauwkeurig met uitzondering van het element chroom. Chroom in casing (kunstdarmen) gaat tijdens de ontsluiting niet of onvolledig in oplossing. ICP-MS is een tijdrovende techniek en de analyse is gebonden aan het laboratorium. De resultaten verkregen met XRF-XEPOS zijn in goede overeenstemming met de INAA en/of ICP-MS resultaten. De XRF-XEPOS resultaten voor Cr verkregen met de huidige semi kwantitatieve meetmethode liggen een factor 2 tot 4 hoger dan de INAA en/of ICP-MS resultaten. Het toevoegen van vergelijkbare kalibratiemonsters aan het meetprogramma kan een verschuiving van een semi-kwantitatieve naar een kwantitatieve analyse bewerkstelligen. De XRF-XEPOS is een snelle, efficiente en op locatie inzetbare meetmethode. De XRF-NITON is alleen inzetbaar als indicatie voor monsters met een zeer hoge overschrijding van de norm, waarbij echter ook vals positieve monsters worden gemeten.

 

RIVM - Bilthoven - Nederland - www.rivm.nl
Rijksinstituut voor Volksgezondheid en Milieu RIVM
( 2003-02-06 )